Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

mUzima Application gives you the chance to customize the application with your special requirements.

However mUzima application provides some default settings, you can personalize them.

Default settings are defined as the settings that majority of users would choose This is done through default settings (settings that personalize the app to the users needs), that can be personalized.

The purpose of this document is to introduce you to these settings and to describe how to configure them.

Open the Settings menu

  1. On any page while where the options menu is available, tap the three vertical dots () at the top-right corner.
  2. Then a menu will be appear which gives you an access to further actions related to the current activity such as Settings, Help, and also gives ability to log out.
    Image Added

  3. Choose the 'Settings' menu item, then the Settings menu will be appear. 
    You can now configure the parameters of the feature you would like to change.

Image Removed



OpenMRS Settings

Server URL

In this section, you can change the server URL (OpenMRS instance URL) which your mUzima App is linked to and draws data from.

To change the server URL follow the following steps:

  1. Tap on the available server link and you will be enable to make the necessarily changes by typing a new server URL.


  2. Tap 'OK' to save the changes or tap 'CANCEL' to abort themrevert the changes.
    After tapping 'OK', an alert dialog will be appear which warns you that if you change the server URL, all your mUzima data will be cleared.
    At this point, you can withdraw you server URL changes or confirm them.

...

Note

If you change the server URL, it will clear all mUzima data from your device.


User name and Password

There is no option to change the user name or the password. They can only be changed from the server side.

...

This means that the application automatically signs you out you after the application stays idle (you do not perform any action during this amount of time ) for the specified time  and you need to log in again.

...

  1. Tap on the session timeout field. The session timeout dialog will be openpop-up.

  2. Set the new session timeout value in minutes.

  3. Tap 'OK' to save the changes or tap 'CANCEL' to abort themrevert the changes.

Note: For security reason , it is recommended not to set the session timeout too short or long timeto a large value since it will take long to automatically log you out if you forget to log out. If you set it too short, it can cause that the application will to log you out you more often.

Automatic form save interval (mins)

Automatic form save interval is the time interval the application saves takes to automatically save the current changes a form automatically helping to reduce the form changes (saved as draft), this helps in reducing risk of important data loss.

...

  1. Tap on the automatic form save interval field. A dialog will be openpop-up, where you can set the new, desired value.
  2. Set the new value in minutes.

  3. Tap 'OK' to save the changes or tap 'CANCEL' to abort themrevert the changes.

Real Time Sync

This feature allows you to automatic enables/disables upload of completed patient forms. That means, when you are if connected to the internet, completed forms form data are synchronized automatically from to the server to the device and vice versa.

If Internet connection is not available, completed form data will be synced when connection becomes available later.

If the Real Time Sync check box is ticked, the real time synchronization is set (enabled), otherwise notit is disabled.

To set this feature, tap on the Real Time Sync check box:

...

You can set whether primary medical record number is required or not during client registration process.

Info

This setting depends on the server side setting. It will only be set if server side is set (enabled), else it will be disabled.

For setting this feature:

  1. Tap on the 'Require medical record number' field. 
    If the checkbox is ticked, it means you need to set the primary medical number to the new client during the registration process.
  2.  After, you tap on this settings, a dialog appear: This will check if the server side setting is enabled in order for it to enable the mobile side.

Duplicate form data warning

Once If the check box is checked, you will be warned in case he the same form template has been filled for the same patient with the same encounter date. This feature help helps in avoiding form data duplication. If not checked, no possible duplicate warning will be given.

To avoid the form duplication, set this feature on by taping the check box:

...

mUzima application lets you adjust the font size to one that is most suits you. This font size applies to all forms.

...

  1. Open the landing page dialog by tapping on the landing page settings. 
  2. Choose one of the available options: Dashboard, Client List.


Dashboard:

Image Modified

Client List:

Image Modified

Enable Night Mode (New Feature coming up in versions greater than 2.4.0)

mUzima App provides two different themes: Dark and Light. The default theme is the dark.

For setting To set the Light theme as the mUzima App's Application theme, tap on the 'Enable Night Mode' checkbox:

...

Dark Theme:

Image Added

Light Theme:

Image Modified

Enable SHR

With this settings you can enable or disable to the use of smart card featuresfeature.

To make it enabled, tap on the 'Enable SHR' checkbox. 

...

If SHR is enabled, on the clients listing page, you can see a yellow sim card icon with a search icon in it. When the SHR is disabled, the yellow icon is not been seen. 


Clients List: (SHR Enabled)

Image Modified

Client

Summary

List: (SHR Disabled)

Image Removed

Image Added

If SHR is enabled, on the client summary page, you can see a yellow sim card icon and the SHR data tab. Otherwise they can not be seen:

Clients

List

Summary:(SHR Enabled)

Image Removed


Image Added

Client Summary:(SHR Disabled)

Image Modified


Enable GPS

...

Checking/Ticking this enables collecting GPS coordinates when a form template is opened assuming user agrees to turn on device location and internet connectivity is available.

...

This feature is used for setting device location

...

in forms automatically. If it is enabled, the location on forms will be set according to the device's location.

Note:




Info

You need to enable the permission to capture location data on your device, otherwise

...

permission denied message will be populated.




Provider/Location Settings


Default encounter provider

In mUzima application, you can set yourself the logged in user as the default encounter provider. Once this If the check box is checked, the logged in user will automatically be populated as the provider by default:encounter provider for all forms on from load.

Manage Providers

Under this section, you can manage providers by downloading one more providers from the server or removing one provider or providers from the device. For opening the Providers dialog tap on 'Manage providers' field.

...

Adding a new

...

provider 

  1.  Start typing the name of the provider you would like to add to the providers list.
    After typing at least three characters, if mUzima app finds any name which matches your request, a list appears and you can choose the provider you want.
  2. Choose the desired name from the list. The selected name will be added instantly to the providers list:

    Image Modified

    Info

    Internet connection is needed when adding providers to provider list.


Remove provider

You can remove one or more providers at the same time:

  1. Select the provider(s) you would like to remove.
    The background of color for the provider will turn into blue as shown as signifying it is selected. At the same time, a bin icon ( ) appears at the top-right corner of the screen. 
  2. Tap on the bin () icon. The provider(s) will be removed immediately from your providers list.
    You can remove multiple providers at the same time by selecting all of them one by one.

...

In this section, you can set the default encounter location by selection selecting the location from the given locations list. If a default encounter location is set, the encounter location will automatically be populated as the encounter location in the forms.

Follow the following steps for to set the default encounter location:

  1. Tap on the Default Encounter Location field on the settings dialog (this field shows you the current default encounter location set before). 
  2. While the default encounter location A pop-up dialog appears upon tapping, select a location from the given list.
    After your selection, the default encounter location will be set immediately. If you don't want to set or change it, tap on the 'Cancel' button.

...


Note

If the location you selected would be removed from your location list, the default encounter location will be changed into 'No default encounter location'.


Manage Locations

Under this section, you can manage locations by downloading one from the server or removing one from your device. For opening To open the Locations dialog, tap on Manage locations field.

...

  1. Start typing the name of the location you would like to add to the locations list. After typing at least three charactercharacters, if mUzima app finds any location name which matches your request, a list appears.
  2. Choose the location you want to add to the locations list. The new location will appear on the locations list immediately.
    Image Modified

    Info

    Internet connection is needed when adding providers to provider list.


Remove location

You can remove one or more locations from your list at the same time:

  1. Select the name of the location you want to remove from the locations list.
    The background of the location will turn into blue as shown signifiying it is selected for removingremoval. At the same time, a bin icon () appears on the top-right corner of the screen.
    You can deselect any location by taping on it again.
  2. Tap on the bin () icon for removing to remove the location or locations.
    The location will be removed immediately from the list.
    You can remove multiple locations at the same time by selecting all of them one by one.

...


Note
If you remove the location which was set as default encounter location before, the default encounter location will show 'No default encounter location'.


Cohort Settings

Manage Cohort prefixes

A cohort is a list of patients that share the same characteristics, e.g. location, age, gender. Cohorts are created according to the patient attributes.

For opening To open the Manage cohort prefixes dialog tap on Manage cohort prefixes field.

...

  1. Start typing part of the desired cohort you would like to add to your list. After typing at least three characters, all matching cohorts will be displayed in a list. 
  2. Choose a cohort you would like to add your list and tap on the 'Add' button, mUzima app will append it to your cohort prefixes list:

Remove cohort prefix

You can remove one a cohort prefix from your list . For removing cohort prefix, you need to select by selecting the bin icon ( ) next to the name of the cohort prefix.

...

Concepts are used to configure what observations to download will be downloaded for the patients. That means, you can manage what kind type of historical data will be shown downloaded for the patients from the server. If you add more concepts, more information will be downloaded for the patients if available. If you remove concept from your list, the data will not be downloaded even if it is available. You can manage your concept list any time. 

Under this section, you can manage concepts by downloading one from the server or removing one from your device.

For opening the

To open the Concepts dialog, tap on the Manage concepts field.  You can manage your concept list any time. 

Adding new concept

  1. Start typing the name of the concept you would like to add to the concepts list.
    After typing at least three characters, all concepts will matching the characters will be displayed in a list. 
  2. Choose the concept you would like to add your list and mUzima app will automatically add it to your concept list:
    Image Added

Remove concept

You can remove one or more concepts from your list at the same time:

  1. Select the name of the concept you would like to remove.
    The background of the concept will turn into blue as shown signifying it is selected for removingremoval. At the same time, a bin icon ( ) appears on the top-right corner of the screen.
    You can remove multiple concepts at the same time by selecting all of them one by one.
    You can deselect any concepts by taping on it again. 
  2. If you really want to To remove the concept from the concepts list, tap on the bin () icon and the concept will be removed immediately from your locations concepts list.
    Image Added